Automation > Fanners > Permanent Magnetic Sheet Fanners
Our standard permanent and electromagnetic Sheet Fanners and Separators are designed to separate steel sheet stock.
As sheets are placed against the sheet fanner, the powerful magnetic field automatically forces the sheets apart and separates them from one another. Manually prying apart sticky, oily sheets is no longer necessary and die damaging double blanking problems are eliminated.
The flexible mounting design gives you more options to match your application needs. Use the handle and base plate for portable applications or use the tapped holes to bolt the fanner to your equipment or tooling.
Note: Choose a fanner with a height 2-3 inches taller than your maximum stack height.
Typical Magnetic Sheet Separator Installations: For best results, locate the magnetic fanner at the corner(s) of large sheets and in the center of the width of length on smaller sheets. Fanners placed opposite each other on small sheets will actually float the sheet.
| Sheet Stock Size By Square In. |
1/4" - 7ga. |
7 - 12ga. |
12 - 18ga. |
18 - 24ga. |
24 - 30ga. |
| 144 sq. in. |
TKF |
TKF |
MGF |
MGF |
TNF |
| 288 sq. in. |
NA |
TKF |
MGF |
MGF |
TNF |
| 432 sq. in. |
NA |
NA |
MGF |
MGF |
TNF |
| 576 sq. in. |
NA |
NA |
TKF |
MGF |
TNF |
| 864 sq. in. |
NA |
NA |
TKF |
MGF |
(Use 2)TNF |
| 1,152 sq. in. |
NA |
NA |
NA |
MGF |
(Use 2)TNF |
| 1,292 sq. in. |
NA |
NA |
NA |
TKF |
(Use 2)TNF |
| 1,728 sq. in. |
NA |
NA |
NA |
TKF |
(Use 2)TNF |
| 2,304 sq. in. |
NA |
NA |
NA |
(Use 2)TKF |
(Use 2)TNF |
Download Product Page
Order Online - click the part number to add to shopping cart
| Thin Gauge Fanner(TNF): 20 to 30 gauge - 6-3/16" wide, 1-7/16" thick, 1/4-20 tapped |
| Part No. |
Height (in) |
Hole Ctr. |
Weight (lbs) |
| TNF06 |
6-3/16 |
4" |
9 |
| TNF09 |
9-1/4 |
6" |
12 |
| TNF12 |
12-1/4 |
9" |
15 |
| TNF15 |
15-1/4 |
8-5/8" |
18 |
| Medium Gauge Fanner(MGF): 12 to 20 gauge - 6-3/16" wide, 2-11/16" thick, 3/8-16 tapped |
| Part No. |
Height (in) |
Hole Ctr. |
Weight (lbs) |
| MGF09 |
9-1/4 |
6" |
29 |
| MGF12 |
12-1/4 |
9" |
40 |
| MGF15 |
15-1/4 |
8-5/8" |
49 |
| MGF18 |
18-5/16 |
10-3/16" |
58 |
| MGF21 |
21-5/16 |
11-5/8" |
68 |
| Thick Gauge Fanner(TKF): 7 to 12 gauge - 8-5/16" wide, 3" thick, 3/8-16 tapped |
| Part No. |
Height (in) |
Hole Ctr. |
Weight (lbs) |
| TKF09 |
9" |
6 |
43 |
| TKF12 |
12" |
9 |
60 |
| TKF15 |
15" |
8-5/8" |
69 |
| TKF18 |
18" |
10-3/16" |
83 |
| TKF21 |
21" |
11-5/8" |
97 |
|
 |
See Also Electromagnetic Sheet Fanners
See Also Magnetic Pin Fanners®
See Also Magnetic SheetSeeker®
See Also Air Actuated Sheet Fanners
See Also Air Knife Fanners
|
